1" DV Series Fipt x Fipt Plastic Residential Irrigation Valve
Primary Applications: Economical irrigation valve for residential and light commercial applications. Features and Benefits: Double-filtered pilot-flow design for maximum reliability. Balanced-pressure diaphragm for long life. External bleed to manually flush system of dirt and debris during installation and system start-up. Internal bleed for spray-free manual operation. Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter. Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring. Operates in low-flow and Xerigation?? applications when the RBY filter is installed upstream. 1.25" (3,2 cm) stainless steel phillips head screws. Accepts latching solenoid for use with Rain Bird battery-operated controllers. Available as: 3/4" (20/27) and 1" (26/34) standard in-line configuration 1" (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations 1" (26/34) Angle (A) configurations for flexible installations especially when submains are deep 1" (26/34) Male-by-Male (MM) thread configuration for quick and easy manifolding 1" (26/34) Male-by-Barb (MB) and 1" Male-by-1.25" Barb male thread inlet by barb outlet configuration for installation with poly pipe. NEW! 1" Union-by-Union (UU) female union thread configuration for quick and easy manifolding NEW! 1" Union-by-Barb (UB) female union thread inlet by barb outlet configuration for quick and easy manifolding with poly pipe. Models: 075-DV: 3/4" (20/27) 100-DV: 1" (26/34)* 100-DV-SS: 1" (26/34) 100-DV-A: 1" (26/34)* 100-DV-MM: 1" (26/34)* 100-DV-MB: 1" (26/34) 100-DV-UU: 1" (26/34) * (NEW!) 100-DV-UB: 1" (NEW!) 125-DV-MB: 1" (26/34) M x 1 1/4" (33/42) B *Available with BSP threads Specifications: Pressure: 15 to 150 psi (1,0 to 10,4 bar) 075-DV Flow: 0.2 to 22 GPM (0,05 to 5,0 m3/h; 0,01 to 1,39 l/s). For flows below 3 GPM (0,75 m3/h; 0,21 l/s) or any Xerigation?? application, use RBY-075-200MX Filter installed upstream. 100-DV Flow (non-union): 0.2 to 40 GPM (0,05 to 9,08 m3/h; 0,01 to 2,52 l/s). For flows below 3 GPM (0,75 m3/h; 0,21 l/s) or any Xerigation?? application, use RBY-100-200MX Filter installed upstream. 100-DV Flow (union): 0.2 to 20 GPM (0,05 to 4,54 m3/h; 0,01 to 1,26 l/s). For flows below 3 GPM (0,75 m3/h; 0,21 l/s) or any Xerigation?? application, use RBY-100-200MX Filter installed upstream. Temperature: Up to 110?? F (43?? C) Ambient air temperature: Up to 125?? F (52?? C) 24 VAC 50/60 Hz (cycles per second) solenoid power requirement: 0.30 A (7.2 VA) inrush current; 0.23 A (5.5 VA) holding current Solenoid coil resistance: 38 Ohms Dimensions: Height: 4 1/2" (11,4 cm) Height (Angle): 5 1/2" (14 cm) Width: 3 1/3" (8,4 cm) Length: 4 3/8" (11,1 cm) Length (Angle): 3 3/4" (9,5 cm) Length (MM): 5 3/8" (13,6 cm) Length (MB): 5 3/4" (14,6 cm) Length (UU): 5 7/8" (14,9 cm) Length (UB): 6" (15,2 cm)
Primary Applications: Economical irrigation valve for residential and light commercial applications. Features and Benefits: Double-filtered pilot-flow design for maximum reliability. Balanced-pressure diaphragm for long life. External bleed to manually flush system of dirt and debris during installation and system start-up. Internal bleed for spray-free manual operation. Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter. Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring. Operates in low-flow and Xerigation?? applications when the RBY filter is installed upstream. 1.25" (3,2 cm) stainless steel phillips head screws. Accepts latching solenoid for use with Rain Bird battery-operated controllers. Available as: 3/4" (20/27) and 1" (26/34) standard in-line configuration 1" (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations 1" (26/34) Angle (A) configurations for flexible installations especially when submains are deep 1" (26/34) Male-by-Male (MM) thread configuration for quick and easy manifolding 1" (26/34) Male-by-Barb (MB) and 1" Male-by-1.25" Barb male thread inlet by barb outlet configuration for installation with poly pipe. NEW! 1" Union-by-Union (UU) female union thread configuration for quick and easy manifolding NEW! 1" Union-by-Barb (UB) female union thread inlet by barb outlet configuration for quick and easy manifolding with poly pipe. Models: 075-DV: 3/4" (20/27) 100-DV: 1" (26/34)* 100-DV-SS: 1" (26/34) 100-DV-A: 1" (26/34)* 100-DV-MM: 1" (26/34)* 100-DV-MB: 1" (26/34) 100-DV-UU: 1" (26/34) * (NEW!) 100-DV-UB: 1" (NEW!) 125-DV-MB: 1" (26/34) M x 1 1/4" (33/42) B *Available with BSP threads Specifications: Pressure: 15 to 150 psi (1,0 to 10,4 bar) 075-DV Flow: 0.2 to 22 GPM (0,05 to 5,0 m3/h; 0,01 to 1,39 l/s). For flows below 3 GPM (0,75 m3/h; 0,21 l/s) or any Xerigation?? application, use RBY-075-200MX Filter installed upstream. 100-DV Flow (non-union): 0.2 to 40 GPM (0,05 to 9,08 m3/h; 0,01 to 2,52 l/s). For flows below 3 GPM (0,75 m3/h; 0,21 l/s) or any Xerigation?? application, use RBY-100-200MX Filter installed upstream. 100-DV Flow (union): 0.2 to 20 GPM (0,05 to 4,54 m3/h; 0,01 to 1,26 l/s). For flows below 3 GPM (0,75 m3/h; 0,21 l/s) or any Xerigation?? application, use RBY-100-200MX Filter installed upstream. Temperature: Up to 110?? F (43?? C) Ambient air temperature: Up to 125?? F (52?? C) 24 VAC 50/60 Hz (cycles per second) solenoid power requirement: 0.30 A (7.2 VA) inrush current; 0.23 A (5.5 VA) holding current Solenoid coil resistance: 38 Ohms Dimensions: Height: 4 1/2" (11,4 cm) Height (Angle): 5 1/2" (14 cm) Width: 3 1/3" (8,4 cm) Length: 4 3/8" (11,1 cm) Length (Angle): 3 3/4" (9,5 cm) Length (MM): 5 3/8" (13,6 cm) Length (MB): 5 3/4" (14,6 cm) Length (UU): 5 7/8" (14,9 cm) Length (UB): 6" (15,2 cm)